WiFi Repeater Wi-fi Range Extender 300Mbps Access Point
Q1. Can’t see WiFi Repeater on smart phone or Computer ?
A1. ①Please check whether the second light on the repeater is flicking/blinking/flashing or not under powered. If no, please long press the reset button for 10 seconds to reset the repeater first. ②The network name ( SSID ) of the wifi from Router must be set to ” visible“.
Q2. Can’t enter setting page 192.168.10.1 ?
A2. Please change another browser and try again , such as Google Chrome / Firfox. If you set up on computer, please check the IP address on your computer, detail see manual page 10.
Q3. Can’t connect to internet after finished setting ?
A3. Please check whether you enter the same password as your router, and check is there any special characters in it, such as ~!@#$%^&*(). If yes, please change your router password. Repeater can not identify special characters.
Q4. How to reset the repeater ?
A4. Please long press the reset button for 10 seconds under powered. ( NOT WPS button, the reset button is at the side)
Q5. Where can I get the upgrade firmware ?
A5. Our repeater is the newest model, Generally does not need to upgrade. If the repater stop working suddently, please reset it first, Contact us if it still not work after reset.
Q6. What is the status of the repeater working normally?
A6. Under powered, the second light flicking/blinking/flashing, means the repeater is working normally. If the second light fixed, or OFF, means the repeater need to us reset first.
In order to protect the life of the repeater, reduce the loss of product use. Please do not use the repeater for a long time（more than 24 hours ). When you do not need to use it, please take it out from the power supply.
- Improve wireless coverage in all WLAN networks.
- Access to the Internet for computers located on the edge or outside of the range of your access point.
- Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards .
- Provides up to 300Mbps transmission rates.
- Support 2.4 GHz WLAN networks.
- Maximum WLAN security with WPA2, WPA and WEP (128/64).
- Software wizard for simple setup.
- 2dBi antennas integrated
- Support Wireless Repeater Mode and Standard AP Mode.
- Provides one 10/100Mbps Auto-Negotiation Ethernet LAN ports.
- correct the language and the stablility of signal
- revise default reboot
- former version need reticle to reboot,but now do not need.
- The 2 version can support Chinese,English
Product Type: WIFI Repeater
Color: White Black
Plug Type: EU / US / UK Plug
Voltage: AC 110-240V
Output: 5V 1A
Frequency Range: 2.41-2.48GHz
Max Transmission Speed: 300Mbps
Support Mode: Repeater Mode / AP Mode
Connectivity Type: Wireless / Wired
Networking Cable Length: Approx. 1m
1x Wireless WiFi Repeater
1x RJ-45 Networking Cable
1x Installation Guide